[Genie]

Hey All, just a quick one to see what those of you that are fitting swing arm spools seem to be purchasing for their 899's.
I've been told they are a 6mm thread.
A little research on the web shows up a few options.
Enjoying ordering some goodies while I wait for my 899 to arrive

Thanks in Advance to all that post responses………….


Pitbull have released a 899 specific spool

LighTech have 2 options

Woodcraft have 2 options (1 with Sliders incorporated)

Rizoma

SpeedyMoto (incorporated slider)

 

[Genie]

Evotech

 

[Evolution]

I did 6mm woodcraft spools

 

[Esrever]

Do these just screw on your swing arm? Is it almost entirely aesthetic or will this have something to do with performance as well.

 

[Hyperider]

I installed the Speedy Moto on mine and I like it. Nice and well made and yes they are the 6mm size. The spool is use to catch the V on the Pitbull double sided swing arm stands. It also acts as a slider protector for your swing arm in case of a crash.

 

[devill66]

I bought these...

Ducati 899 Panigale racing CNC Hinterrad Schwinge Ständer ultra light aufbocken | eBay

And will click a set of sliders in the axle. Came across a set wich can be put in en left in for getting the rear wheel out.

 

[Infinwin]

I installed the Speedy Moto on mine and I like it. Nice and well made and yes they are the 6mm size. The spool is use to catch the V on the Pitbull double sided swing arm stands. It also acts as a slider protector for your swing arm in case of a crash.

+1 I have and like them.

 

[FlyingQ]

SpeedyMoto.....

 

[jarelj]

You're correct, any 6mm spool will work, same size as most Yamaha sport bikes have taken forever so there are a bazillion options on the market. I'm putting the Woodcraft slider spools on my 899 track bike.

 

[Miro]

In my opinion Evotech is far best paddock stand spool on market, but nobody seems to sell them. At least I couldn't find them.

 

[jarelj]

In my opinion Evotech is far best paddock stand spool on market, but nobody seems to sell them. At least I couldn't find them.

We do carry Evotech products, but I don't believe their 899 spools have been released yet. As soon as they're available we'll have them listed on our web site.

EDIT: Just checked EvoTech web site, it does indeed still show them as "Out of Stock"
Ducati Panigale 899 Spindle Bobbins | Ducati Spindle Bobbins

 

[Doostur]

You're correct, any 6mm spool will work, same size as most Yamaha sport bikes have taken forever so there are a bazillion options on the market. I'm putting the Woodcraft slider spools on my 899 track bike.

Correct! Any current generation R1 or R6 will work. Got some on ebay for $15 shipped!

 

[ashuskarde]

I fitted the Rizoma spools, but I think the Speedymoto are the most practical and well built (couldn't handle orange on my bike).

 

[devill66]

I fitted the Rizoma spools, but I think the Speedymoto are the most practical and well built (couldn't handle orange on my bike).

Had Rizoma, changed them for the MVS performance, they have a bigger inside ring. I like those for not scratching the rearfork with the paddockstand...

 

[ashuskarde]

Had Rizoma, changed them for the MVS performance, they have a bigger inside ring. I like those for not scratching the rearfork with the paddockstand...

Do you have pics of the MVS on your bike?

 

[devill66]

Hmmz, let,s see if this works.....

http://imageshack.com/a/img845/1048/luyr.jpg

 

[devill66]

http://imageshack.com/a/img843/9511/6ycn.jpg

http://imageshack.com/a/img203/8161/nrze.jpg

http://imageshack.com/a/img21/979/9gxu.jpg

My Phone does not make really great pics... sorry.

 

[Warhammer]

I got Driven D-Axis 6mm.

 

[ashuskarde]

My Rizoma spools actually came as 8mm so I had to tap that...

 

[Ozmillcharl]

I was looking for some DP spools, as far as I can see you can only purchase with the rear paddock stand - has anyone got/ seen these?