Ducati 899 Panigale Forum banner
1 - 2 of 2 Posts

·
Registered
Joined
·
3 Posts
Discussion Starter · #1 ·
My exhaust popped out of place and I'm assuming it's cause my servo was stuck in the closed position which caused a lot of vibration so I fixed the servo problem but would rather fix this by myself then get the dealer to fix it.
41125
 

·
Registered
Joined
·
3 Posts
Discussion Starter · #3 ·
Remove the lower fairing and try to understand what happened, it's definitely NOT normal for the exhaust to drop like that. Check all the bolts and also the condition of the rubber grommets. It's not a difficult job, but if you're not confident about it, please take the bike to a proper shop.
I ended up fixing it yesterday. The exhaust servo was closed which caused alot of pressure which pushed the pipe up. I removed the springs and moved it back into place. Also opened up the Flapper valve
 
1 - 2 of 2 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top