Carbon parts

29203 Views 73 Replies 25 Participants Last post by rklima1, Apr 6, 2015

monty1001972

Discussion Starter · Mar 7, 2014

Hi Guys
I am trying to look for gloss clear coat carbon parts for front mudguard, rear hugger and exhaust heat shield. Probably heels guards at some stage when decide what rearsets to get.
I would like to get from all the same manufacturer so all the weave and coating are consistent.

I like this from slingshot racing ($129 - quite reasonable) but they say for 2014 model. I assume it will fit the 2013 model? The front guard is quite expensive at $240 and not got a rear for 899.

Anyone got any suggestions? Proving to be quite hard to source.

Much obliged!

and a quick poll.....which would you prefer/think would look better?....gloss or matt coat? (on arctic white model)

1 - 20 of 74 Posts

DonSanto

· #2 · Mar 7, 2014

Take a look here: carbonvani.com
High quality parts. They can also do custom stuff. As for clear vs matt; I've never understood the matt carbon fiber. IMO it looks like cheap plastics with fake carbon look

Maybe, but just maybe it, could look good on the white bike since its paint is somewhat matt. But as all things, in the end, it comes down to personal preference.

S.I.U.

· #3 · Mar 7, 2014

I think matte would look better on the 899, not sure about gloss. Might have to see both on the bike to better decide

Ad_raz

· #4 · Mar 7, 2014

IMO I would prefer the gloss carbon on my red 899. I like the shine when the sun hits it. But as said I think matte could work well on the gorgeous shape especially in white

Jack84

· #5 · Mar 10, 2014

This is my bike... full carbon rear end including rear hugger, exhaust heatshield from the full system termi..

Anybody know where to find the carbon chain guard?

See less See more

rjjr

· #6 · Mar 10, 2014

I happen to like the matte on the white color but it's really personal preference.

Jack84

· #7 · Mar 11, 2014

will update picture of my white with a few carbon parts as soon i get it install..

Reactions: 1

Winter

· #8 · Mar 12, 2014

rjjr said:
I happen to like the matte on the white color but it's really personal preference.

I agree, the Matte Carbon on the white looks HOT. My girl has a Monster 696 Artic White Gloss, and the Gloss Carbon looks better on that.. but ya all a matter of personal preference.

monty1001972

Discussion Starter · #9 · Mar 12, 2014

Thank for all your comments so far. Yes, it's all down to personal preference. I think the gloss might look good as it will be contrast against the matte white and might add a bit of sparkle/bling.
Might have a to wait a while for more products to get into market. I'm certainly a believer that less can be more and bikes that are ALL carbon is a bit much....but again, that's my opinion.....everyone has different tastes and I would definitely not say that someones pride and joy looks 'rubbish' just because it may not be to my liking.
Some guys like fake boobies....some guys like natural....all about personal taste....if you excuse the phrase!

rjjr

· #10 · Mar 12, 2014

monty1001972 said:
Thank for all your comments so far. Yes, it's all down to personal preference. I think the gloss might look good as it will be contrast against the matte white and might add a bit of sparkle/bling.
Might have a to wait a while for more products to get into market. I'm certainly a believer that less can be more and bikes that are ALL carbon is a bit much....but again, that's my opinion.....everyone has different tastes and I would definitely not say that someones pride and joy looks 'rubbish' just because it may not be to my liking.
Some guys like fake boobies....some guys like natural....all about personal taste....if you excuse the phrase!

Natural.

Reactions: 1

monty1001972

Discussion Starter · #11 · Mar 21, 2014

Just spoke to a nice guy at Conquest Carbon. Rear huggers will be available in about a week or so and price around £100.

adeyrob

· #12 · Mar 21, 2014

monty1001972 said:
Just spoke to a nice guy at Conquest Carbon. Rear huggers will be available in about a week or so and price around £100.

be good to see some photos if you get one

monty1001972

Discussion Starter · #13 · Apr 20, 2014

Conquest Carbon now has rear huggers available.....£130.

cyphon68

· #14 · Apr 21, 2014

different strokes for different folks I guess. I tend to like the dry carbon look more than the wet carbon, unless its a 4x4 twill or v-weave pattern and you're leaving it totally naked. (see Zonda R or Koenigsegg Agera if you aren't sure what I mean by 4x4 twill or v-weave)

Reactions: 1

Tio899

· #15 · Apr 22, 2014

5

Hope this helps you out... I have all OEM Carbon from Ducati too include the Spring Cover and Ignition cover. It is more matte carbon than anything. I like it that way. The 1199 is glossy. Enjoy!

See less See more

Reactions: 2

Bunglebubs

· #16 · Apr 23, 2014

Tio899 that hugger looks good.

Reactions: 1

S.I.U.

· #17 · Apr 23, 2014

Tio899 said:
Hope this helps you out... I have all OEM Carbon from Ducati too include the Spring Cover and Ignition cover. It is more matte carbon than anything. I like it that way. The 1199 is glossy. Enjoy!

Looking good, loving those carbon fiber pieces.

monty1001972

Discussion Starter · #18 · May 3, 2014

4

Got a Ducati Performance front fender today from dealer. They are quite a bit more expensive than other aftermarket carbon supplier. The finish is great and looks great.
Also gave in and got white rear seat cowl. I do not think they will ever sort the colour issue. Its not too bad.

See less See more

Reactions: 2

monty1001972

Discussion Starter · #19 · May 3, 2014

Tio899 said:
Hope this helps you out... I have all OEM Carbon from Ducati too include the Spring Cover and Ignition cover. It is more matte carbon than anything. I like it that way. The 1199 is glossy. Enjoy!

Nice. I like the DP OEM parts. You may pay more but you definitely get good quality. I got front fender today. Got other parts coming from conquest carbon soon.

mini bus

· #20 · May 3, 2014

I got the whole catalogue of DP carbon parts
Including the engine cover which you don't see

But I am doing a warranty claim ATM
Cause the engine cover doesn't fit right
One side bolts up correctly and the other side sticks out like 5mm of the engine case
And hitting the fairing

The dealer told me it was like that.
I told him I'm paying top dollar for these parts
And it sits like that
Are the carbon parts made in china ???
Hahhahaha now his doing a warranty claim

Hopefully they change it
Or money back

I could be real picky with the DP carbon parts
Cause your paying so much for it
But I won't go there

See less See more

1 - 20 of 74 Posts

This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.