Ducati 899 Panigale Forum banner

At home fender eliminator kit

3326 Views 3 Replies 3 Participants Last post by  Infinwin
Follow the first 3 directions on the site below for your own at home fender eliminator kit. No need to do much more just be a little savvy during the first 3 simple steps re-plug in the stock turn signals & stuff them In the tail's air vent and you have yourself a legal fender eliminator with stock turn signals built into the tail... I tucked license plate led light connector into trunk because I didn't connect license plate light...

https://www.newragecycles.com/v/vspfiles/assets/images/1199_899 Fender Eliminator Kit.pdf

Attachments

See less See more
1 - 4 of 4 Posts
That looks great to me, thanks for sharing it. Here's a bigger version of that picture:

See less See more
  • Like
Reactions: 1
I used Italian flag color zip ties(yes ghetto I know) to mount the license plate onto rear passenger pegs...
I used Italian flag color zip ties(yes ghetto I know) to mount the license plate onto rear passenger pegs...
I'm betting your exhaust will melt those ties... Get some safety wire so you don't lose your plate.
1 - 4 of 4 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top